10 Best Pcie Low Profile Bracket in 2026

A Pcie Low Profile Bracket lets full-height expansion cards fit inside compact computers without leaving their ports unsupported. The right choice depends on card dimensions, screw spacing, connector position, chassis clearance, and whether the bracket must match a specific controller or network adapter.

This guide compares ten brackets using the compatibility, dimensions, included hardware, material, and installation details supplied for each product. It covers server RAID controllers, enterprise and desktop network cards, Quadro graphics cards, M.2 adapters, and slot covers for compact computer cases.

The list begins with a well-documented Intel M.2 and SAS adapter bracket, then covers specialized Dell, Lenovo, IBM, NVIDIA, Intel, Mellanox, and Solarflare applications. Each pick highlights its strongest use and important limitations, while current prices and availability should be checked before ordering.

Top 3 Picks for Best Pcie Low Profile Bracket

Top 10 Best Pcie Low Profile Bracket in 2026 Compared

The table below compares all ten brackets by their documented card support, construction, mounting details, and intended installation environment, making it easier to identify the correct fit before buying.

1. Deal4GO 8cm Bracket – Best Documented General Fit

4.4Editor scoreCheck price on Amazon

Deal4GO 8cm Low Height Profile Bracket

54 mm screw spacing

8 cm bracket height

1.9 cm bracket width

Three mounting screws

The Deal4GO 8cm Low Height Profile Bracket is a compact, well-documented option for Intel 750-series M.2 SSD adapters, SATA PCIe adapters, SAS cards, and other compatible devices. It carries a 4.4 rating and stands out because the listing provides exact bracket dimensions and a clear 54 mm screw-hole distance, two details that are essential when replacing a card bracket.

Pros

• Clear dimensional specifications
• Broad stated card compatibility
• Anti-corrosive reflective finish
• Three screws included
• Suitable for SFF cases

Cons

• Requires 54 mm spacing
• Compatibility is card-specific

We may earn a commission when you buy through this link, at no additional cost to you.

Its short backplate measures 3 3/4 inches, or 8 cm, in height and 3/4 inch, or 1.9 cm, in width. The included screws add practical value because the bracket can be installed without searching separately for compatible fasteners. A high-reflectivity, anti-corrosive finish also makes the metal bracket better suited to long-term placement inside a compact desktop or server chassis.

The main limitation is that the 54 mm hole spacing is not universal. The seller explicitly advises buyers to check the adapter before purchasing, which is sensible guidance for anyone comparing this bracket with a generic low-profile mounting plate. The 8 cm height may also be longer than the shortest available server brackets, so chassis clearance should be confirmed before ordering.

This is the most practical recommendation for a user who can confirm the required 54 mm spacing and the listed Intel 750, SAS, or PCIe adapter fit. It suits SFF desktop builders, compact workstations, and systems with a similar short-bracket pattern. Among the roundup, it offers one of the clearest combinations of dimensions, mounting information, finish, and included hardware.

Measurement Clarity Prevents Fitment Errors

The stated 54 mm screw-hole distance is the most important buying detail. Measure the original bracket or card mounting holes before ordering, rather than relying only on a card model name.

Useful for Compact Desktop and Server Builds

The short 8 cm profile suits systems with limited rear clearance, while the anti-corrosive finish and supplied screws support a straightforward replacement installation.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

2. Dell PERC Bracket Pair – Best for RAID Controller Replacements

Check price on Amazon

Dell PERC H330 Bracket Pair

Two steel brackets

PERC H330 compatibility

RAID controller card support

Screws included

This two-piece low-profile bracket set is intended for replacing the mounting bracket on Dell PERC H330, H730p, and H740p RAID controller cards. It also lists compatibility with Dell Boss 7HYY4, MegaRAID 9361-4i, LSI 9361-8i 12G RAID, and SAS 9340-8i controllers. The steel construction is designed to resist deformation and hold the controller firmly in its PCIe slot.

Pros

• Two brackets included
• Steel construction
• Wide server controller range
• Supports Dell and Lenovo systems
• Resists deformation

Cons

• No customer rating supplied
• Highly model-specific compatibility

We may earn a commission when you buy through this link, at no additional cost to you.

The compatibility list extends beyond Dell to Lenovo and IBM controllers, including M1215 part numbers 46C9114 and 46C9115, as well as IBM M5210 00AE852 and 46C9111 products. That breadth is valuable for technicians maintaining mixed server fleets, especially when the original low-profile bracket has been lost or bent during a hardware swap.

Because the product is a specialized server component, buyers should not treat every listed controller as automatically interchangeable. The exact bracket geometry, card model, rear connector position, and screw pattern must match. A two-pack can be useful for spare inventory, but it is unnecessary if only one chassis needs a replacement, and the absence of a supplied rating leaves fewer customer-feedback signals for comparison.

Choose this option when its explicit controller list includes the card and workstation or server model being serviced. It is a strong match for enterprise technicians who need a durable steel replacement and already know the PERC, MegaRAID, LSI, M1215, or M5210 part number involved.

Built for Server Maintenance Work

Steel construction and a firm PCIe-slot hold suit replacement work involving full-size RAID or SAS controllers in space-constrained chassis.

Useful Spare for Mixed Server Fleets

Receiving two brackets can provide a spare for a second matching controller, provided the intended card is included in the stated compatibility range.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

3. BestParts Five-Pack – Best for Multiport Network Cards

4.4Editor scoreCheck price on Amazon

BestParts Five-Pack Brackets

Five metal brackets

Intel multiport card support

HP and Dell models included

Matching screws included

The BestParts five-pack targets several generations of multiport network interface cards, including Intel E1G44ET and E1G44ET2, I340-T4, I350-T4, HP NC365T, and Dell H092P, K828C, HM9JY, and YT674 models. Its 4.4 rating and generous five-bracket quantity make it especially useful for administrators who service several compatible systems or want replacement parts on hand.

Pros

• Five-bracket multipack
• Broad multiport NIC coverage
• Metal construction
• Screws for each bracket
• Useful for technician inventories

Cons

• Generic replacement design
• Exact dimensions are not stated

We may earn a commission when you buy through this link, at no additional cost to you.

Each bracket is made from metal and is shipped with screws, providing the basic hardware needed for a replacement installation. The assortment covers several enterprise and OEM network-card families, reducing the need to search separately for a bracket each time a matching adapter is moved between machines.

The trade-off is that it is a generic rather than card-branded replacement, and the supplied description does not provide exact hole spacing or bracket dimensions. That makes visual and physical comparison with the original part essential. A similar model number does not always guarantee identical connector clearance, so the bracket should not be installed without checking the card layout and mounting pattern.

This pack is a strong choice for IT teams supporting several of the listed Intel, HP, or Dell quad-port cards. It is also attractive for home labs and office systems where multiple low-profile NICs may be present. For one specialized card, a single tailored bracket may be easier, but for a fleet with several matching models, the five-pack is especially useful.

Convenience for Repeated Server Upgrades

Keeping several matching brackets on hand is useful when multiple compatible network cards require replacement or are moved between compact servers.

Coverage Across Major OEM Families

The listed Intel, HP, and Dell compatibility makes the pack more versatile than a bracket named for only one adapter family.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

4. NVIDIA Quadro Short Bracket – Best for Workstation Graphics

4.7Editor scoreCheck price on Amazon

NVIDIA Quadro Short Bracket

Metal short bracket

Supports numerous Quadro models

Workstation card focus

Two screws included

The New Low Profile Short Bracket for NVIDIA Quadro is the highest-rated product in this comparison, with a 4.7 rating. It is designed for Quadro K1200, NVS 510, P400, P600, P620, P1000, T600, and T1000 cards, giving compact workstation builders a focused replacement option for several common professional graphics adapters.

Pros

• Highest listed customer rating
• Supports many Quadro generations
• Short replacement profile
• Two screws included
• Metal construction

Cons

• Limited to listed models
• Exact measurements are not provided

We may earn a commission when you buy through this link, at no additional cost to you.

Its metal construction provides a more substantial replacement than a thin decorative cover, while the included pair of screws supports a straightforward installation. The short format is intended to replace a full-height bracket so a supported Quadro card can be used in a chassis with a low-profile expansion-card layout.

The key drawback is model specificity. Although the title names a broad collection of cards, users should confirm both the card model and the physical bracket arrangement, particularly the positions of display connectors. Exact measurements are not provided, so comparing the replacement with the original bracket remains important even when the card name appears in the list.

This is the leading choice for someone replacing the bracket on one of the listed NVIDIA professional graphics cards in a compact workstation. Its 4.7 rating, broad supported-model range, metal construction, and included screws make it the most reassuring all-around option in this roundup, subject to confirming connector alignment.

Professional Graphics Support in Small Chassis

A short replacement bracket allows supported Quadro cards to remain installed in compact professional workstations without relying on an ill-fitting full-height plate.

Strong Feedback and Simple Hardware

The 4.7 rating provides the strongest customer-feedback signal among the listed products, while two included screws cover the basic fastening requirement.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

5. Intel X-Series Bracket – Best for X540 and X710 Cards

3.8Editor scoreCheck price on Amazon

Intel X-Series Network Bracket

Metal replacement bracket

Intel X540-T2 support

X710-T2L compatibility

Two mounting screws

This generic low-profile short bracket is made for Intel X540-T2, X710-T2L, and X710AT2 network cards. It is a focused replacement for compact systems using these enterprise-oriented adapters and includes two mounting screws. Its 3.8 rating is the lowest numerical customer score among the products that have one, so buyers should pay particularly close attention to fit.

Pros

• Targets common Intel adapters
• Metal construction
• Includes two screws
• Suitable for short installations

Cons

• Lowest-rated listed product
• Only three models specified

We may earn a commission when you buy through this link, at no additional cost to you.

The metal construction and short shape are appropriate for replacing the original bracket on a supported Intel network card. Because a network card's external connectors must line up with the openings in the chassis or server enclosure, the correct card family is only the first step in confirming compatibility.

The product description does not state dimensions, hole spacing, or connector cutout positions. That makes physical comparison with the original bracket important. Its model list is also narrower than that of the BestParts five-pack, and the customer rating is less favorable than the other rated choices in the guide.

This bracket makes sense for a technician who has confirmed that the card is an X540-T2, X710-T2L, or X710AT2 and has the original part available for comparison. It is less suitable for buyers seeking broad model coverage, those who cannot verify the physical pattern, or users who want a more established customer-rating profile.

Targeted Support for Intel Server Networking

The bracket is aimed at three named Intel network adapters, making it relevant to compact servers and professional workstations that use those specific cards.

Verify Connector Cutouts Before Ordering

Because no exact dimensions or cutout positions are listed, comparing the plate with the original bracket can prevent a mismatch around Ethernet or SFP ports.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

6. Multiport NIC Short Bracket – Best for I340 and I350

4.4Editor scoreCheck price on Amazon

Short Bracket for Multiport NICs

Metal short bracket

Intel I340-T4 support

Intel I350-T4 support

One mounting screw

The Short Bracket for I340-T4, I350-T4, X710-T4L, and X710-T4 network cards combines a 4.4 rating with support for several widely used multiport Intel adapters. Its compact metal form is intended to replace a full-height bracket in a space-limited server or desktop chassis.

Pros

• Supports common multiport NICs
• Solid 4.4 customer rating
• Metal construction
• Covers X710-T4 variants

Cons

• Only one screw included
• Exact dimensions are not stated

We may earn a commission when you buy through this link, at no additional cost to you.

The product description also lists Intel E1G44ET and E1G44ET2 compatibility, along with HP NC365T and Dell H092P, K828C, HM9JY, and YT674 models. That expanded list makes the bracket relevant beyond the three models in its title, although every intended card should still be checked against the physical layout.

A notable limitation is the inclusion of only one screw. Some card and bracket arrangements use a second fastener, so installers may need an additional compatible screw if the original hardware is unavailable. As with the other generic replacements, no exact dimensions or hole-spacing measurements are provided in the supplied information.

This option is well suited to a builder installing an Intel I340-T4, I350-T4, or listed X710-T4 variant and needing a short replacement plate. Its 4.4 rating and metal construction make it a credible choice, but the single-screw package and absence of detailed measurements require careful comparison with the original part.

Matches Common Multiport Network Cards

Support for I340, I350, and X710-T4 variants addresses several adapters commonly used when additional network connectivity is needed in compact systems.

Check the Needed Fastener Count

Only one screw is included, so users should compare it with the removed hardware and obtain another matching screw if the installation requires two.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

7. AVerMedia Low Profile Bracket – Best for Compact Installations

3.7Editor scoreCheck price on Amazon

AVerMedia Low Profile Bracket

Space-saving low profile

Designed for compact builds

Limited installation details

General accessory listing

The AVerMedia Low Profile Bracket is a general compact-system accessory with a 3.7 customer rating. Its central advantage is the stated space-saving design, which is relevant when a compatible expansion or capture card needs to fit into a chassis with limited expansion-card clearance.

Pros

• Explicit space-saving design
• Suitable for constrained systems
• Simple product concept
• Recognizable accessory category

Cons

• Lowest customer rating
• No model compatibility list
• No dimensions supplied

We may earn a commission when you buy through this link, at no additional cost to you.

Unlike most products in this roundup, the supplied listing does not name specific compatible card models, describe the included hardware, or provide bracket dimensions. The result is a shorter specification profile, with the focus placed on conserving space inside the system rather than documenting a detailed range of card models.

That lack of detail creates more uncertainty. Without screw spacing, connector positions, material details, or a compatibility list, the buyer cannot confirm fit from the product description alone. The lower rating also provides less reassurance than the 4.4 and 4.7 products with more detailed customer feedback.

This bracket may be suitable for a user who already knows the corresponding AVerMedia card or installation and can visually confirm the fit. It is not the strongest recommendation for a first-time buyer. For those shopping by keyword alone, a bracket with explicit model numbers, measurements, and included screws will generally be easier to match correctly.

Prioritizes Space Conservation

The low-profile form addresses a common obstacle in compact builds where a full-height card bracket would conflict with the chassis or adjacent components.

Compatibility Requires Independent Verification

Because the listing omits named card models and measurements, buyers should inspect the original bracket and compare connector and screw positions before purchasing.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

8. SING F LTD Six-Slot Bracket

4.0Editor scoreCheck price on Amazon

SING F LTD Six-Slot Bracket

Six steel slot covers

80x18x13 mm dimensions

Fits low profile cases

Supports airflow and cooling

The SING F LTD set differs from the other products because it is a collection of low-profile PCI and PCIe slot covers rather than a replacement mounting bracket for a specific expansion card. Each cover measures 80 by 18 by 13 mm, and the set contains six pieces for low-profile computer cases.

Pros

• Six covers in one set
• Exact dimensions provided
• Steel construction
• Blocks dust and debris
• Supports clean airflow

Cons

• Covers unused slots only
• Not a card mounting bracket

We may earn a commission when you buy through this link, at no additional cost to you.

The steel construction is intended to resist bending and corrosion while shielding open expansion slots from dust and debris. The covers also help maintain a finished appearance and are described as supporting proper ventilation inside a PC or server case. Their 4.0 rating gives them a moderate customer-feedback profile.

The main limitation is their different purpose. These covers fit unused 80 mm expansion slots; they do not provide the screw pattern or connector clearance required to mount an unsupported expansion card. A buyer searching for a bracket to adapt a full-height card to a low-profile system will need one of the model-specific products instead.

This set is best for a system builder who wants to close several unused low-profile slots after upgrading, adding cards, or tidying a compact workstation. It is also helpful for protecting a frequently used home office or lab PC from dust. Treat it as a finishing and maintenance accessory, not as a substitute for a card-specific PCIe bracket.

Cleaner and More Protected Open Slots

Six covers can close multiple unused expansion positions, reducing visible openings and limiting the entry of dust into an otherwise finished case.

Useful Complement to Expansion Builds

These covers work well after a compact system has been populated with cards, leaving other low-profile slots open but tidy and protected.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

9. Mellanox CX312B Bracket – Best for Half-Height NICs

Check price on Amazon

Mellanox CX312B NIC Bracket

Metal low profile bracket

Matches OEM MTM005078

Supports CX312B variants

Two mounting screws

The Low Profile NIC Bracket for OEM MTM005078 is designed for Mellanox CX312B and MCX312B-XCCT network interface cards that need half-height PCIe installation. It directly addresses the need to convert supported standard NICs for slim PCs, rackmount systems, and mini-tower enclosures while keeping external ports accessible.

Pros

• Matches named OEM reference
• Clear card model support
• Two screws included
• Designed for half-height slots
• Simple installation process

Cons

• No customer rating supplied
• Only Mellanox models specified

We may earn a commission when you buy through this link, at no additional cost to you.

The stated OEM reference is particularly helpful because it gives buyers another way to identify the correct replacement beyond the product name. Installation involves aligning the bracket with the card's SFP ports, securing it using two screws, and then seating the card in the system. The package includes one bracket and two mounting screws.

Users still need to confirm compatibility. The description is limited to the named Mellanox models, and no exact bracket dimensions or port-spacing measurements are supplied. The absence of a customer rating also means there is no numerical feedback signal for this model, so direct comparison with the original bracket is particularly advisable.

Choose this product for a supported Mellanox CX312B or MCX312B-XCCT card in a compact server or desktop that accepts half-height PCIe cards. Its clear OEM reference, two-screw package, and simple installation description make it a focused and understandable choice for technicians familiar with the card.

OEM Reference Simplifies Identification

The MTM005078 reference can help buyers locate the corresponding original part and compare its shape, port openings, and mounting holes.

Fasteners Support Direct Replacement

Two included screws allow the bracket to be secured around the supported NIC's SFP port area before the card is installed in the chassis.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

10. Solarflare X2522 Bracket – Best for SFF Network Servers

Check price on Amazon

Solarflare X2522 NIC Bracket

Metal half-height bracket

Solarflare X2522 support

Matches OEM SF references

SFF server installation

The Solarflare X2522 PCIe Low Profile Bracket is a half-height replacement for compact servers and small form-factor systems. It supports the Solarflare X2522 network adapter and matches OEM references SF-109041 and SF-109042, providing useful identifiers when an original bracket is missing or unsuitable for a slim installation.

Pros

• Targets Solarflare X2522
• Matches two OEM references
• Metal construction
• Smooth bracket edges
• Two-screw installation

Cons

• No customer rating supplied
• Only one bracket included

We may earn a commission when you buy through this link, at no additional cost to you.

Its metal construction and smooth edges are intended to support the NIC during insertion and removal while helping protect connector alignment. The bracket can replace a missing or full-height plate in a small desktop, rack server, home lab, office workstation, or data-center node, and it supports tidy cable routing in dense systems.

The most important precaution is model and geometry verification. The listing explicitly recommends checking the card layout, screw holes, port spacing, and backplate shape before purchase. A matching card name alone may not resolve every physical variation, and the package contains only one bracket, so users with multiple matching systems will need additional units.

This is a specialized recommendation for a Solarflare X2522 installation where the OEM references and physical layout match. Its strengths are clear: metal construction, a half-height format, and suitability for dense SFF and server environments. As with the other model-specific options, verifying the original bracket remains the safest way to prevent an incompatible purchase.

Stable Support for Dense Network Builds

The half-height metal design is suited to compact servers that must maintain card stability without sacrificing space around adjacent ports and cables.

Two OEM Numbers Assist Identification

SF-109041 and SF-109042 give technicians additional references to compare against the original bracket, though port spacing and screw holes still require confirmation.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

Buying Guide – How to Choose the Best Pcie Low Profile Bracket

The safest purchase starts with the card rather than the keyword. Match the exact adapter model, then verify bracket dimensions, screw spacing, connector positions, chassis clearance, included fasteners, and the material needed for a stable installation.

Exact Expansion Card Compatibility

Begin by identifying the full model number of the card that needs a replacement bracket. A listing may support several related cards, but those models can differ in connector count, connector order, tab style, and mounting pattern. Compare the seller's named models with the label on the card and with the original bracket. Compatibility language is most useful when it includes exact model identifiers, such as Intel I340-T4, NVIDIA Quadro P400, Mellanox CX312B, or Solarflare X2522.

Screw Hole Spacing

Screw-hole spacing is one of the most consequential measurements on a PCIe bracket. The Deal4GO model, for example, states a 54 mm distance, while many of the other products do not publish this detail. Measure the original bracket or the card's mounting points with a ruler, then compare that figure with the available product information. A bracket that looks similar can still fail if its holes are offset by only a small amount.

Connector Alignment and Clearance

The bracket must position every external connector within the matching opening in the chassis. Ethernet, SFP, SAS, USB, and display connectors each have different shapes and positions. Compare the cutout arrangement on the replacement with the original, paying particular attention to the order and spacing of ports. A card can be electronically compatible with a system yet still be unusable if its connectors do not align with the enclosure.

Bracket Height and Chassis Clearance

Low profile does not mean one universal length. The Deal4GO bracket is explicitly 8 cm high and 1.9 cm wide, while other products are described only as short or half-height. Measure the available distance between the rear case opening and nearby components, including drives, cables, fans, and full-height cards. A bracket can be correctly drilled yet still interfere with another part inside the chassis.

Material and Structural Support

Metal is a common choice for the model-specific brackets in this guide because it provides a rigid support point around the card's mounting holes. Products described as steel are specifically presented as resistant to deformation, while other listings identify their material simply as metal. A rigid bracket helps the card remain aligned during installation and removal, which is particularly valuable in servers that are frequently serviced.

Included Mounting Screws

Included screws can simplify a replacement, but their quantity and thread compatibility should be checked rather than assumed. The Deal4GO bracket includes three screws, the NVIDIA Quadro and Intel X-Series options include two, the multiport NIC option lists one, and the Dell PERC set is described as including screws. Some cards or brackets may require more than the included amount, so retain the original hardware and compare thread size and head shape.

Server and Desktop Use Case

Server installations often emphasize RAID, SAS, and enterprise networking compatibility, while desktop and workstation users may need an NVIDIA graphics, multiport NIC, or M.2 adapter bracket. The two Dell PERC and Lenovo/IBM controller options suit specialized server maintenance, the NVIDIA bracket targets professional graphics, and the Mellanox and Solarflare products serve compact network systems. Select according to the hardware in the chassis rather than by general case type.

Multi-Back versus Single-Bracket Need

The five-pack of generic network-card brackets is useful for administrators supporting several matching systems, while most single-bracket products suit one installation. The Dell PERC option includes two pieces, and the SING F LTD product contains six slot covers for a different purpose. Buying a multipack can improve readiness for repeated maintenance, but it is unnecessary when only one replacement is needed and the required card is not among the listed models.

How to Use and Care for Your Pcie Low Profile Bracket

Begin with the system powered off and disconnected. If replacing an existing bracket, remove the card carefully, preserve its screws, and note the orientation of every connector opening. Compare the new bracket with the original one, confirming screw spacing, connector positions, and overall height before attaching anything.

Align the bracket with the card's mounting holes and the chassis's expansion-slot opening. Fasten it with the specified or original screws without overtightening. For the Mellanox product, the stated process is to align the bracket over the SFP ports, secure it with two screws, and then seat the card. For all brackets, confirm that ports remain accessible and that the card is firmly held without bending.

Reconnect the card and any attached cables, then check that the bracket does not contact fans, drives, cables, or neighboring cards. Keep the bracket clean and dry, inspect it for bent holes or corrosion during service visits, and replace it if its mounting surface becomes distorted. Always follow the card and chassis manufacturers' installation guidance as well.

Frequently Asked Questions

Final Thoughts on Choosing the Best Pcie Low Profile Bracket

Related guides

• 10 Best Global Satellite Phone (October 2026) Expert Guide
• 10 Best Bluetooth Computer Speakers (October 2026) Expert Guide
• 10 Best Clean Sound Amp for Guitars (October 2026) Expert Guide
• 10 Best Cheap Countertop Dishwasher (October 2026) Expert Guide